Attic Door Insulation Covers
Click to enlarge image
Progressive Pull Down Attic Insulation Covers
$189.99
Availability: In stock
Item #: E4-MT STAR
Why Green
- Effective insulation R-value of 13 - Saves Energy and money
- Manufactured from at least 40% recycled materials
Expert Rating:
Availability: Usually ships within 2 days.
- Description
- Features
- Model Choices
- Energy Rating
- Setup/Care
- How it Works
- Craftsmanship
- Efficiency
- Reviews
- Warranty
- Summary
Description
Are you unknowingly heating or cooling the attic of your home? There are three issues when considering how to eliminate heat transfer from the attic in the summer or from the home in the winter. First, there is air leakage caused by poor fitting attic staircases. Secondly, heat escapes by traveling through solid objects either escaping through the attic in the winter time or migrating into the living spaces in the summer time. Finally, heat is radiated from the roof into your living area the same way that heat travels from a stove to your hands when you place your hands near the burner. All of these issues can be addressed through the simple installation of the Progressive Attic Insulation Cover. Our attic insulating covers provide an effective seal against drafts, heat or air conditioning loss, and they are simple, easy-to-install systems for energy savings.
Model Choices
 Progressive Pull Down Attic Insulation Covers |
|
|
 Progressive Knee Wall Attic Insulation Covers |
|
|
 Progressive Whole House Fan Insulation Covers |
|
|
Setup/Care
Installs in less than ten minutes! No tools required.
1. Remove the Progressive Attic Insulation Cover from the shipping box and packing bag.
2. Unfold the Progressive Attic Insulation Cover
3. Open the attic access pull-down stairway and extend
the ladder to the floor.
4. Apply a bead of silicon caulking around the inside of
the framework just above the pull-down stairway frame.
5. Open the Progressive Attic Insulation Cover up with the front section zipper pulls facing toward the floor and at the hinged
end of the folding stairway.
6. Push the sides of the perimeter wall against the inner
framework where you had previously applied the bead of
silicon caulking and press in place. Make sure the
Progressive Attic Insulation Cover side, front, and rear sections are attached to the inside of the framework and the
perimeter wall is pushed down against the pull-down
stairway frame as far as it will go.
7. Recheck the perimeter wall to ensure that all sections
are adhered to the framework. (Place some staples at
the corners if you plan to use the Progressive Attic Insulation Cover before the caulking is cured (24 hrs.).
8. Let the silicon setup for 24 hours to cure.
9. You can now begin using the Progressive Attic Insulation Cover for access to the attic.
10. Your new Progressive Attic Insulation Cover starts saving you on your energy bill right away.
How it Works
The Progressive Attic Insulation Cover unit is composed of a multi-layer foam composite with radiant barriers on each side. This design prevents energy loss from your home in three ways.
First, heat is trapped in the attic during the summer to be dispensed via the attic fan instead of warming up the air in your living area.
Second, during this time frame, air conditioned air inside the home is maintained by keeping it from escaping thru the pull-down stairs in the attic.
Third, heat is contained inside your home during the winter, while keeping the cold air in the attic
Summary
Are you spending more money than necessary to heat or cool your home? The Progressive Pull Down Attic Insulation Cover attaches to the inner framework of the opening of the attic pull-down ladder access point. It, in effect, seals off the hole in your ceiling stopping either the super-heated or super-cold air in the attic from invading the living area of your home. These simple units save you money and are a snap to install.
Make Selections | ||||||||
|---|---|---|---|---|---|---|---|---|
|
||||||||
|
||||||||
|
||||||||
